SINGLE BATTERY SWITCH OM6000A

300A Single Battery Switch. ON-OFF
Suitable for Marine and RV

Ideal for marine and RV applications
Ignition Protected - safe for installation aboard gasoline powered engines
Surface, front panel or rear panel mounting
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
0.000
10000000
  • Ideal for marine and RV applications
  • Ignition Protected – safe for installation aboard gasoline powered engines
  • Surface, front panel or rear panel mounting
  • Tin-plated copper studs for maximum conductivity and corrosion resistance
  • Studs accept 3/8″ (M10) ring terminals
  • 7/8″ (22 mm) stud length accepts multiple cable terminals
  • One-piece stainless flange nuts ensure safe and secure connections
  • Isolating cover protects rear contacts
  • Breakout tabs allow wire access in any direction
  • 6 Circuit label set included

Cranking Rating: 30 sec. 900A  Intermittent Rating: 5 min. 500A Continuous Rating 300A Voltage Max. Operating 48V DC

Regulatory E marked, ISO 8846, UL Listed – UL 1107 electric power switches   Meets American Boat and Yacht Council (ABYC) requirements Meets UL 1500 and SAE J1171 external ignition protection requirements IP66 – protected against powerful water jets (see inside back cover)

Switch Type:  Single Circuit ON-OFF. Switches a single battery to a single load group

Color: Red
Switch Positions: 2
Battery Combine: No
Alternator Field Disconnect:  No
Maximum Voltage: 48V DC
Terminal Stud Torque: 120 in-lb (13.56 Nm)
Continuous Rating: 300A
Intermittent Rating: 500A (5 min)
Cranking Rating 30 sec: 900A
Battery Inputs: 1
Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm)
Cable Size to Meet Ratings: 4/0 AWG (120mm²)
Mounting Holes: Accept #10 Screw
Stud Material: Tin-plated Copper
Stud Torque: 120 in-lb (13.56 Nm)
Terminal Stud Size: 3/8″ – 16 (M10)
Weight: 0.65Lb (0.29 Kg)

COMPARISON TABEL

DUAL BATTERY SWITCH OM6020A

300A 3 Position Dual Circuit Switch
Suitable for Marine and RV

Ideal for marine and RV applications
Ignition Protected - safe for installation aboard gasoline powered engines
Surface, front panel or rear panel mounting
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
0.000
10000000
  • Ideal for marine and RV application
  • Ignition Protected – safe for installation aboard gasoline powered engines
  • Surface, front panel or rear panel mounting
  • Tin-plated copper studs for maximum conductivity and corrosion resistance
  • Studs accept 3/8″ (M10) ring terminals
  • 7/8″ (22 mm) stud length accepts multiple cable terminals
  • One-piece stainless flange nuts ensure safe and secure connections
  • Isolating cover protects rear contacts
  • Breakout tabs allow wire access in any direction
  • 6 Circuit label set included

Cranking Rating: 30 sec. 900A  Intermittent Rating: 5 min. 500A Continuous Rating 300A Voltage Max. Operating 48V DC

Regulatory E marked, ISO 8846, UL Listed – UL 1107 electric power switches   Meets American Boat and Yacht Council (ABYC) requirements Meets UL 1500 and SAE J1171 external ignition protection requirements IP66 – protected against powerful water jets (see inside back cover)

  •  

Switch Type:  Single Circuit ON-OFF. Switches a single battery to a single load group

Color: Red
Switch Positions: 2
Battery Combine: No
Alternator Field Disconnect:  No
Maximum Voltage: 48V DC
Terminal Stud Torque: 120 in-lb (13.56 Nm)
Continuous Rating: 300A
Intermittent Rating: 500A (5 min)
Cranking Rating 30 sec: 900A
Battery Inputs: 1
Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm)
Cable Size to Meet Ratings: 4/0 AWG (120mm²)
Mounting Holes: Accept #10 Screw
Stud Material: Tin-plated Copper
Stud Torque: 120 in-lb (13.56 Nm)
Terminal Stud Size: 3/8″ – 16 (M10)
Weight: 0.65Lb (0.29 Kg)

COMPARISON TABEL

SELECTOR 4 POSITION BATTERY SWITCH OM6010A

300A Dual Battery Selector Switch. Selector 4 Position 1-2-Both-Off
Suitable for Marine and RV

Ideal for marine and RV applications
Ignition Protected - safe for installation aboard gasoline powered engines
Surface, front panel or rear panel mounting
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
0.000
10000000
  • Ideal for marine and RV applications
  • Ignition Protected – safe for installation aboard gasoline powered engines
  • Surface, front panel or rear panel mounting
  • Tin-plated copper studs for maximum conductivity and corrosion resistance
  • Studs accept 3/8″ (M10) ring terminals
  • 7/8″ (22 mm) stud length accepts multiple cable terminals
  • One-piece stainless flange nuts ensure safe and secure connections
  • Isolating cover protects rear contacts
  • Breakout tabs allow wire access in any direction
  • 6 Circuit label set included

Cranking Rating: 30 sec. 900A  Intermittent Rating: 5 min. 500A Continuous Rating 300A Voltage Max. Operating 48V DC

Regulatory E marked, ISO 8846, UL Listed – UL 1107 electric power switches   Meets American Boat and Yacht Council (ABYC) requirements Meets UL 1500 and SAE J1171 external ignition protection requirements IP66 – protected against powerful water jets (see inside back cover)

  •  

Switch Type:  Single Circuit ON-OFF. Switches a single battery to a single load group

Color: Red
Switch Positions: 2
Battery Combine: No
Alternator Field Disconnect:  No
Maximum Voltage: 48V DC
Terminal Stud Torque: 120 in-lb (13.56 Nm)
Continuous Rating: 300A
Intermittent Rating: 500A (5 min)
Cranking Rating 30 sec: 900A
Battery Inputs: 1
Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm)
Cable Size to Meet Ratings: 4/0 AWG (120mm²)
Mounting Holes: Accept #10 Screw
Stud Material: Tin-plated Copper
Stud Torque: 120 in-lb (13.56 Nm)
Terminal Stud Size: 3/8″ – 16 (M10)
Weight: 0.65Lb (0.29 Kg)

COMPARISON TABEL

More Products

Service Pedestal

Service Pedestal
Single Circuit

Single Circuit
Dual Circuit

Dual Circuit

Selector 4 position

Selector 4 position

Shore Power Cable

Shore Power Cable
close menu icon

Get in touch with us